Thickness tolerance
Thickness tolerances for plates, sheets and strips
according to SR EN 13599:2014
Values in millimetres
Nominal widths | Thickness tolerances for nominal widths | ||||||
|---|---|---|---|---|---|---|---|
from 10 up to 200 inclusive | over 200 up to 350 inclusive | over 350 up to 700 inclusive | over 700 up to 1,000 inclusive | over 1,000 up to 1,250 inclusive | |||
| normal | special | ||||||
over | up to and including | ||||||
| 0.05a | 0,1 | ±10 %b | - | - | - | - | - |
| 0,1 | 0,2 | ±0,010 | ±0,007 | ±0,015 | - | - | - |
| 0,2 | 0,3 | ±0,015 | ±0,010 | ±0,020 | ±0,03 | ±0,04 | - |
| 0,3 | 0,4 | ±0,018 | ±0,012 | ±0,022 | ±0,04 | ±0,05 | ±0,07 |
| 0,4 | 0,5 | ±0,020 | ±0,015 | ±0,025 | ±0,05 | ±0,06 | ±0,08 |
| 0,5 | 0,8 | ±0,025 | ±0,018 | ±0,030 | ±0,06 | ±0,07 | ±0,09 |
| 0,8 | 1,2 | ±0,030 | ±0,022 | ±0,040 | ±0,07 | ±0,09 | ±0,10 |
| 1,2 | 1,8 | ±0,035 | ±0,028 | ±0,06 | ±0,08 | ±0,10 | ±0,11 |
| 1,8 | 2,5 | ±0,045 | ±0,035 | ±0,07 | ±0,09 | ±0,11 | ±0,13 |
| 2,5 | 3,2 | ±0,055 | ±0,040 | ±0,08 | ±0,10 | ±0,13 | ±0,17 |
| 3,2 | 4,0 | - | - | ±0,10 | ±0,12 | ±0,15 | ±0,20 |
| 4,0 | 5,0 | - | - | ±0,12 | ±0,14 | ±0,17 | ±0,23 |
| 5,0 | 6,0 | - | - | ±0,14 | ±0,16 | ±0,20 | ±0,26 |
| 6,0 | 7,0 | - | - | ±0,16 | ±0,19 | ±0,23 | ±0,29 |
| 7,0 | 8,0 | - | - | ±0,18 | ±0,22 | ±0,26 | ±0,32 |
| 8,0 | 9,0 | - | - | ±0,20 | ±0,25 | ±0,29 | ±0,35 |
| 9,0 | 10,0 | - | - | ±0,22 | ±0,28 | ±0,32 | ±0,38 |
| 10,0 | 25,0 | - | - | ±0,25 | ±0,30 | ±0,35 | ±0,45 |
a) Including 0.05 b) ± 10% of the nominal thickness | |||||||