Extruded round, square, hexagonal, and flat bars

In the table below, you can study the mechanical properties for extruded round bars, square bars, hexagonal bars, and flat bars made of aluminum according to EN 755-2:2014, as follows: tensile strength RM (MPa), yield strength Rp 0.2 (MPa), minimum elasticity (%), bending radius, and hardness.

Mechanical Properties: Extruded Round Bars, Square Bars, Hexagonal Bars, Flat Bars EN 755-2:2014

Mechanical Properties: Extruded Round Bars, Square Bars, Hexagonal Bars, Flat Bars EN 755-2:2016

ALLOY	CONDITION	Dimensions (mm)		Tensile strength Rm (MPa)		Yield strength Rp0.2 (MPa)		Minimum elasticity (%)		Hardness
		Dimensions (mm)		Tensile strength Rm (MPa)		Yield strength Rp0.2 (MPa)		Minimum elasticity (%)		Hardness
		D^a	S^b	min.	max.	min.	max.	A	A_50mm	HBW
EN AW-1050A	F^c	toate	toate	60	⁻	20	⁻	25	23	20
EN AW-2007	T4, T4510,T4511	≤80	≤80	370	⁻	250	-	8	6	95
EN AW-2007	T4, T4510,T4511	80<D≤200	80<S≤200	340	-	220	-	8	-	95
EN AW-2007	T4, T4510,T4511	200<D≤250	200<S≤250	330	-	210	-	7	-	95
EN AW-2011	T4	≤200	≤60	275	-	125	-	14	12	95
EN AW-2017	T4, T4510,T4511	≤25	≤25	380	-	260	-	12	10	105
EN AW-2017	T4, T4510,T4511	25<D≤75	25<S≤75	400	-	270	-	10	-	105
EN AW-2017	T4, T4510,T4511	75<D≤150	75<S≤150	390	-	260	-	9	-	105
EN AW-2017	T4, T4510,T4511	150<D≤200	150<S≤200	370	-	240	-	8	-	105
EN AW-2024	T3, T3510,T3511	≤50	≤50	450	-	310	-	8	6	120
EN AW-2024	T3, T3510,T3511	50<D≤100	50<S≤100	440	-	300	-	8	-	120
EN AW-2024	T3, T3510,T3511	100<D≤200	100<S≤200	420	-	280	-	8	-	120
EN AW-2024	T3, T3510,T3511	200<D≤250	200<S≤250	400	-	270	-	8	-	120
EN AW-2030	T4, T4510,T4511	≤80	≤80	370	-	250	-	8	6	115
EN AW-2030	T4, T4510,T4511	80<D≤200	80<S≤200	340	-	220	-	8	-	115
EN AW-6060	T6	≤150	≤150	190	-	150	-	8	6	70
EN AW-6063	T6	≤150	≤150	215	-	170	-	10	8	75
EN AW-6082	T6	≤20	≤20	295	-	250	-	8	6	95
EN AW-6082	T6	20<D≤150	20<S≤150	310	-	260	-	8	-	95
EN AW-6082	T6	150<D≤200	150<S≤200	280	-	240	-	6	-	95
EN AW-6082	T6	200<D≤250	200<S≤250	270	-	200	-	6	-	95
EN AW-7075	T6,T6510,T6511	≤25	≤25	540	-	480	-	7	5	150
EN AW-7075	T6,T6510,T6511	25<D≤100	25<S≤100	560	-	500	-	7	-	150
EN AW-7075	T6,T6510,T6511	100<D≤150	100<S≤150	550	-	440	-	5	-	150
EN AW-7075	T6,T6510,T6511	150<D≤200	150<S≤200	440	-	400	-	5	-	150

Diameter for round bars
Sb – Width of square, diagonal of hexagon, thickness of flat bar
c – For informational purposes only

Tehnipedia – Provides technical data strictly for informational purposes about the marketed products.