Extruded copper bars and profiles for subsequent forging or stamping, EN 12165
Chemical composition of extruded copper bars and profiles intended for subsequent operations of forging or stamping, EN 12165
1. Table — Composition of copper
| Material | Composition % | Others total | Density, g/cm3 | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Symbol | Number | Element | Cua | Bi | O | P | Pb | total | except | approx. |
| Cu-ETP | CW004A | min. max. | 99,90 | - | - | - | - | - | Ag, O | 8,9 |
| - | 0.0005 | 0,040c | - | 0.005 | 0,03 | |||||
| Cu-OF | CW008A | min. max. | 99.95 | - | - | - | - | - | Ag | 8,9 |
| - | 0.0005 | —d | - | 0.005 | 0,03 | |||||
| Cu-HCP | CW021A | min. max. | 99.95 | - | - | 0.002 | - | - | Ag, P | 8,9 |
| - | 0.0005 | —d | 0.007 | 0,000 5 | 0,03 | |||||
| Cu-DHP | CW024A | min. max. | 99,90 | - | - | 0.015 | - | - | — | 8,9 |
| - | - | - | 0.04 | - | - | |||||
| NOTE The total of the other elements (other than copper) is defined as the sum of Ag, As, Bi, Cd, Co, Cr, Fe, Mn, Ni, O, P, Pb, S, Sb, Se, Si, Sn, Te and Zn, excluding any individually specified elements a Including Ag, up to a maximum of 0.015 b For information only c An oxygen content of up to 0.060% is permitted, subject to agreement between the buyer and the supplier d The oxygen content shall be such that the material meets the hydrogen embrittlement requirements of EN 1976. | ||||||||||
2. Table — Composition of low-alloyed copper alloys
| Material | Composition % | Densitya, g/ cm3 | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Symbol | Number | Element | Cu | Be | Co | Cr | Fe | Mn | Ni | Pb | Si | Zr | Others total | approx. |
| CuBe2 | CW101C | min. | Rest | 1.8 | — | — | — | — | — | — | — | — | — | 8.3 |
| max. | — | 2.1 | 0,3 | — | 0,2 | — | 0,3 | — | — | — | 0.5 | |||
| CuCo1Ni1Be | CW103C | min. | Rest | 0.4 | 0.8 | — | — | — | 0.8 | — | — | — | — | 8.8 |
| max. | — | 0.7 | 1.3 | — | 0,2 | — | 1.3 | — | — | — | 0.5 | |||
| CuCo2Be | CW104C | min. | Rest | 0.4 | 2.0 | — | — | — | — | — | — | — | — | 8.8 |
| max. | — | 0.7 | 2.8 | — | 0,2 | — | 0,3 | — | — | — | 0.5 | |||
| CuCr1Zr | CW106C | min. | Rest | — | — | 0.5 | — | — | — | — | — | 0.03 | — | 8.9 |
| max. | — | — | — | 1.2 | 0,08 | — | — | — | 0,1 | 0.3 | 0.2 | |||
| CuNi1Si | CW109C | min. | Rest | — | — | — | — | — | 1.0 | — | 0.4 | — | — | 8.8 |
| max. | — | — | — | — | 0,2 | 0,1 | 1.6 | 0.02 | 0.7 | — | 0.3 | |||
| CuNi2Si | CW111C | min. | Rest | — | — | — | — | — | 1.6 | — | 0.4 | — | — | 8.8 |
| max. | — | — | — | — | 0,2 | 0,1 | 2.5 | 0.02 | 0.8 | — | 0.3 | |||
| CuZr | CW120C | min. | Rest | — | — | — | — | — | — | — | — | 0.1 | — | 8.9 |
| max. | — | — | — | — | — | — | — | — | — | 0.2 | 0.1 | |||
| a For information only | ||||||||||||||
3. Table — Composition of copper-aluminium alloys
| Material | Composition % | Densitya, g/ cm3 | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Symbol | Number | Element | Cu | Al | Fe | Mn | Ni | Pb | Si | Sn | Zn | Others total | approx. |
| CuAl8Fe3 | CW303G | min. | Rest | 6.5 | 1.5 | — | — | — | — | — | — | — | 7.7 |
| max. | — | 8.5 | 3.5 | 1,0 | 1,0 | 0,05 | 0,2 | 0,1 | 0,5 | 0.2 | |||
| CuAl10Fe1 | CW305G | min. | Rest | 9.0 | 0.5 | — | — | — | — | — | — | — | 7.6 |
| max. | — | 10.0 | 1.5 | 0,5 | 1,0 | 0,02 | 0,2 | 0,1 | 0,5 | 0.2 | |||
| CuAl10Fe3Mn2 | CW306G | min. | Rest | 9 | 2.0 | 1.5 | — | — | — | — | — | — | 7.6 |
| max. | — | 11.0 | 4.0 | 3.5 | 1,0 | 0,05 | 0,2 | 0,1 | 0,5 | 0.2 | |||
| CuA10Ni5Fe4 | CW307G | min. | Rest | 8.5 | 3.0 | — | 4.0 | — | — | — | — | — | 7.6 |
| max. | — | 11.0 | 5.0 | 1,0 | 6.0 | 0,05 | 0,2 | 0,1 | 0,4 | 0.2 | |||
| CuAl11Fe6Ni6 | CW308G | min. | Rest | 10.5 | 5.0 | — | 5.0 | — | — | — | — | — | 7.4 |
| max. | — | 12.5 | 7.0 | 1,5 | 7.0 | 0,05 | 0,2 | 0,1 | 0,5 | 0.2 | |||
| a For information only | |||||||||||||
4. Table — Composition of copper-nickel alloys
| Material | Composition % | Densitya, g/ cm3 | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Symbol | Number | Element | Cu | C | Co | Fe | Mn | Ni | P | Pb | S | Sn | Zn | Others total | approx. |
| CuNi10Fe1Mn | CW352H | min. | Rest | — | — | 1.0 | 0.5 | 9 | — | — | — | — | — | — | 8.9 |
| max. | — | 0,05 | 0,lb | 2.0 | 1 | 11 | 0,02 | 0,02 | 0,05 | 0.03 | 0.5 | 0.2 | |||
| CuNi30Mn1Fe | CW354H | min. | Rest | — | — | 0.4 | 0.5 | 30 | — | — | — | — | — | — | 8.9 |
| max. | — | 0,05 | 0,lb | 1.0 | 1.5 | 32 | 0,02 | 0,02 | 0,05 | 0,05 | 0.5 | 0.2 | |||
| a For information only b Co max. 0.1 % is counted as Ni. | |||||||||||||||
5. Table — Composition of copper-nickel-zinc alloys
| Material | Composition % | Density, g/cm3 | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Symbol | Number | Element | Cu | Fe | Mn | Ni | Pb | Sn | Zn | Others total | approx. |
| CuNi7Zn39Pb3Mn2 | CW400J | min. | 47.0 | — | 1.5 | 6.0 | 2.3 | — | Rest | — | 8,5 |
| max. | 50.0 | 0,3 | 3 | 8.0 | 3.3 | 0,2 | — | 0,2 | |||
| a For information only. | |||||||||||
6. Table — Composition of copper-zinc alloys
| Material | Composition % | Densitya, g/ cm3 | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Symbol | Number | Element | Cu | As | Al | Fe | Mn | Ni | Pb | Sn | Zn | Others total | approx. |
| CuZn37 | CW508L | min. | 62.0 | — | — | — | — | — | — | — | Rest | — | 8.4 |
| max. | 64.0 | — | 0,05 | 0,1 | — | 0,3 | 0,1 | 0,1 | — | 0,1 | |||
| CuZn40 | CW509L | min. | 59.0 | — | — | — | — | — | — | — | Rest | — | 8.4 |
| max. | 61.5 | — | 0,05 | 0.2 | — | 0,3 | 0.2 | 0.2 | — | 0.2 | |||
| CuZn42 | CW510L | min. | 57.0 | — | — | — | — | — | — | — | Rest | — | 8.4 |
| max. | 59.0 | — | 0,05 | 0.3 | — | 0,3 | 0.2 | 0.3 | — | 0.2 | |||
| CuZn38As | CW511L | min. | 61.5 | 0.02 | — | — | — | — | — | — | Rest | — | 8.4 |
| max. | 63.6 | 0.15 | 0,05 | 0,1 | — | 0,3 | 0.2 | 0,1 | — | 0.2 | |||
a For information only b For drinking water applications, restrictions on the chemical composition of some materials listed in this table may apply according to national regulations/laws, for example as specified in the 4 MS Common Composition List | |||||||||||||
7. Table — Composition of copper-zinc-lead alloys
| Material | Composition % | Densitya, g/ cm3 | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Symbol | Number | Element | Cu | Al | As | Fe | Mn | Ni | Pb | Sn | Zn | Others total | approx. |
| CuZn36Pb2As | CW602N | min. | 61.0 | — | 0.02 | — | — | — | 1.7 | — | Rest | — | 8.4 |
| max. | 63.0 | 0.05 | 0.15 | 0,1 | 0,1 | 0,3 | 2.8 | 0.1 | — | 0,2 | |||
| CuZn38Pb1 | CW607N | min. | 60.0 | — | — | — | — | — | 0.8 | — | Rest | — | 8.4 |
| max. | 61.0 | 0.05 | 0,2 | 0,3 | 1.6 | 0.2 | — | 0,2 | |||||
| CuZn38Pb2 | CW608N | min. | 60.0 | — | — | — | — | — | 1.6 | — | Rest | — | 8.4 |
| max. | 61.0 | 0.05 | 0,2 | 0,3 | 2.5 | 0.2 | — | 0,2 | |||||
| CuZn39Pb0,5 | CW610N | min. | 59.0 | — | — | — | — | — | 0.2 | — | Rest | — | 8.4 |
| max. | 60.5 | 0.05 | 0,2 | 0,3 | 0.8 | 0.2 | — | 0,2 | |||||
| CuZn39Pb1 | CW611N | min. | 59.0 | — | — | — | — | — | 0.8 | — | Rest | — | 8.4 |
| max. | 60.0 | 0.05 | 0,3 | 0,3 | 1.6 | 0.3 | — | 0,2 | |||||
| CuZn39Pb2 | CW612N | min. | 59.0 | — | — | — | — | — | 1.6 | — | Rest | — | 8.4 |
| max. | 60.0 | 0.05 | 0,3 | 0,3 | 2.5 | 0.3 | — | 0,2 | |||||
| CuZn39Pb2Sn | CW613N | min. | 59.0 | — | — | — | — | — | 1.6 | 0.2 | Rest | — | 8.4 |
| max. | 60.0 | 0.1 | 0,4 | 0,3 | 2.5 | 0.5 | — | 0,2 | |||||
| CuZn39Pb3 | CW614N | min. | 57.0 | — | — | — | — | — | 2.5 | — | Rest | — | 8.4 |
| max. | 59.0 | 0,05 | 0,3 | 0,3 | 3.5 | 0.3 | — | 0,2 | |||||
| CuZn40Pb1Al | CW616N | min. | 57.0 | 0.05 | — | — | — | — | 1.0 | — | Rest | — | 8.3 |
| max. | 59.0 | 0.3 | 0,2 | 0.2 | 2.0 | 0.2 | — | 0,2 | |||||
| CuZn40Pb2 | CW617N | min. | 57.0 | — | — | — | — | — | 1.6 | — | Rest | — | 8.4 |
| max. | 59.0 | 0,05 | — | 0.3 | — | 0,3 | 2.5 | 0.3 | — | 0,2 | |||
| CuZn35Pb1,5AlAs | CW625N | min. | 62.0 | 0.5 | 0.02 | — | — | — | — | — | Rest | — | 8.4 |
| max. | 64.0 | 0.7 | 0.15 | 0.3 | 0,1 | 0,2 | 0,2 | 0.3 | — | 0,2 | |||
| CuZn33Pb1,5AlAs | CW626N | min. | 64.0 | 0.8 | 0.02 | — | — | — | — | — | Rest | — | 8.4 |
| max. | 66.0 | 1.0 | 0.15 | 0.3 | 0,1 | 0,2 | 0,2 | 0.3 | — | 0,2 | |||
| a For information only b For drinking water applications, restrictions on the chemical composition of some materials listed in this table may apply according to national regulations/laws, for example as specified in the 4 MS Common Composition List | |||||||||||||
8. Table — Composition of complex copper-zinc alloys
| Material | Element | Composition % | Densitya, g/ cm3 | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Symbol | Number | Cu | Al | As | Fe | Mn | Ni | P | Pb | Si | Sn | Zn | Others total | approx. | |
| CuZn23A16Mn4Fe3Pb | CW704R | min. | 63.0 | 5.0 | — | 2.0 | 3.5 | — | — | 0.2 | — | — | Rest | — | 8.2 |
| max. | 65.0 | 6.0 | — | 3.5 | 5.0 | 0.5 | — | 0.8 | 0,2 | 0,2 | — | 0,2 | |||
| CuZn32Pb2AsFeSi | CW709R | min. | 64.0 | — | 0.03 | 0.1 | — | — | — | 1.5 | 0.45 | — | Rest | — | 8.4 |
| max. | 66.5 | 0,05 | 0.08 | 0.2 | — | 0,3 | — | 2.2 | 0.8 | 0.3 | — | 0,2 | |||
| CuZn35Ni3Mn2AlPb | CW710R | min. | 58.0 | 0.3 | — | — | 1.5 | 2.0 | — | 0.2 | — | — | Rest | — | 8.3 |
| max. | 60.0 | 1.3 | — | 0,5 | 2.5 | 3.0 | — | 0.8 | 0,1 | 0.5 | — | 0,3 | |||
| CuZn36Sn1Pb | CW712R | min. | 61.0 | — | — | — | — | — | — | 0.2 | — | 1.0 | Rest | — | 8.3 |
| max. | 63.0 | — | — | 0,1 | — | 0,2 | — | 0.6 | — | 1.5 | — | 0.2 | |||
| CuZn37Mn3A12PbSi | CW713R | min. | 57.0 | 1.3 | — | — | 1.5 | — | — | 0.2 | 0.3 | — | Rest | — | 8.1 |
| max. | 59.0 | 2.3 | — | 1,0 | 3.0 | 1,0 | — | 0.8 | 1.3 | 0.4 | — | 0,3 | |||
| CuZn39Sn1 | CW719R | min. | 59.0 | — | — | — | — | — | — | — | — | 0.5 | Rest | — | 8.4 |
| max. | 61.0 | — | — | 0,1 | — | 0,2 | — | 0,2 | — | 1.0 | — | 0.2 | |||
| CuZn40Mn1Pb1 | CW720R | min. | 57.0 | — | — | — | 0.5 | — | — | 1.0 | — | — | Rest | — | 8.3 |
| max. | 59.0 | 0,2 | — | 0,3 | 1.5 | 0,6 | — | 2.0 | 0,1 | 0.3 | — | 0,3 | |||
| CuZn40Mn1Pb1AlFeSn | CW721R | min. | 57.0 | 0.3 | — | 0.2 | 0.8 | — | — | 0.8 | — | 0.2 | Rest | — | 8.3 |
| max. | 59.0 | 1.3 | — | 1.2 | 1.8 | 0,3 | — | 1.6 | — | 1.0 | — | 0,3 | |||
| CuZn40Mn1Pb1FeSn | CW722R | min. | 56.5 | — | — | 0.2 | 0.8 | — | — | 0.8 | — | 0.2 | Rest | — | 8.3 |
| max. | 58.5 | 0,1 | — | 1.2 | 1.8 | 0,3 | — | 1.6 | — | 1.0 | — | 0,3 | |||
| CuZn21Si3P | CW724R | min. | 75.0 | — | — | — | — | — | 0.02 | — | 2.7 | — | Rest | — | 8.3 |
| max. | 77.0 | 0,05 | — | 0,3 | 0,05 | 0.2 | 0.1 | 0,10 | 3.5 | 0.3 | — | 0.2 | |||
| CuZn33Pb1AlSiAs | CW725R | min. | 64.0 | 0.1 | 0.05 | — | — | — | — | 0.4 | 0.1 | — | Rest | — | 8.5 |
| max. | 67.0 | 0.4 | 0.08 | 0,3 | 0,1 | 0,2 | 0,02 | 0.9 | 0.3 | 0.3 | — | 0.2 | |||
| a For information only b For drinking water applications, restrictions on the chemical composition of some materials listed in this table may apply according to national regulations/laws, for example as specified in the 4 MS Common Composition List | |||||||||||||||